Anchor coulter Turbo Shank colter for harrow

Designed for direct sowing, as well as for work on the technology of mini-till and no-till.
The coulter is equipped with a cutting disc that cuts crop residues and plant roots located in the surface soil layer.
Flanges are fixed on one hub with a disk, which perform three functions:
rolling over the surface of the soil, provide a copy of the field microrelief;
press the crop residues, facilitating their cutting;
compact the soil surface, which allows the anchor to prepare a neat groove with less loosening of the soil.
The ram part of the anchor is made of a wear-resistant high-strength alloy.
Following the anchor is a plastic seed and fertilizer compactor, which tightly presses the seeds to the bottom of the groove, ensuring their guaranteed contact with moist soil.
After the compactor, there is a Chicken-Tracker wheel closing the furrow.
creating air pockets;
excessive compaction of the landing bed;
deep furrow;
dirt sticking to the wheel;
the appearance of a dry crust on dry soil on hot and windy days;
soil compaction in conditions of high humidity, which increases the contact of seeds with soil and favorably affects the uniformity of seedlings.
prepares beds and softens the soil;
promotes mixing of soil with organic residues using no-till technology;
maintains uniformity of seed application in the soil;
gives uniform distribution of seed depth;
excludes overconsolidation of a sowing bed;
has a reliable design;
pressure always falls on 3 points of the tread, which eliminates the sticking of dirt and seeds to the wheel, and also strengthens the soil around the sowing bed;
designed for work on complex soil (moist, hard soil, organic residues).
Length, mm ……………………….….......…1185
Width, mm ………………………………...…192
Height, mm ……………………………...…..1015
Pressure on the soil, kg ……….……..……..350
Anchor width, mm ………………………..…15
Diameter of press wheel, mm ................... 350
The diameter of the cutting disc, mm ...…..405
Seeding depth adjustment, cm ................. 2-10
Opener stroke for copying relief, mm ........ 150
Mounting on the seeder frame .... beam 80x80 or 100x100